TESTING

Price: £58.95 (£69.27 Including VAT at 17.5%)

For testing to BS EN 1610 : 1998 and approved Doc H. Complete with U gauge, bellows, Y-piece, hoses, ½in. and 1in. test nipples, carry case and two 4in. Camstoppers®. Weight 2 kg.

Price: £63.90 (£75.08 Including VAT at 17.5%)

For testing to BS EN 1610 : 1998 and approved Doc H. Complete with U gauge, bellows, Y-piece, hoses, ½in. and 1in. test nipples, carry case and two 6in. Camstoppers®. Weight 3 kg.

Price: £34.25 (£40.24 Including VAT at 17.5%)

Kit contains all the items required (except testing plugs) to carry out an air test to 100mm water gauge pressure (10mb) on any size of drain or pipe in accordance with BSEN1610:1998. Contents : U Gauge; hand bellows pump; ½ in. BSP & 1in. BSP nipple caps; tee piece; 3 x 2ft. lengths of rubber hose.Weight 0.5 kg.

Price: £5.45 (£6.40 Including VAT at 17.5%)

Non toxic, non acidic, oil free, dense white smoke testers for testing drains etc. No matches required. Works under water. Approx volume 300cu.m. Approx burn time 90seconds. Weight 0.2 kg.

Price: £9.05 (£10.63 Including VAT at 17.5%)

For tracing the direction of flow or to where a drain pipe runs. The recommended dilution rate is one pot of dye (approx. 230g) to 9 litres of water. The liquid is then use at a rate of 140ml-250ml per 450 litres, depending on the ground conditions. One pot (approx. 230g) of drain dye will treat 28,800 litres at 140ml per 450 litres and up to 16,200 litres at 250ml per 450 litres. Weight 0.3 kg.

Price: £7.30 (£8.58 Including VAT at 17.5%)

For tracing the direction of flow or to where a drain pipe runs. The recommended dilution rate is one pot of dye (approx. 230g) to 9 litres of water. The liquid is then use at a rate of 140ml-250ml per 450 litres, depending on the ground conditions. One pot (approx. 230g) of drain dye will treat 28,800 litres at 140ml per 450 litres and up to 16,200 litres at 250ml per 450 litres. Weight 0.3 kg.

Price: £7.30 (£8.58 Including VAT at 17.5%)

For tracing the direction of flow or to where a drain pipe runs. The recommended dilution rate is one pot of dye (approx. 230g) to 9 litres of water. The liquid is then use at a rate of 140ml-250ml per 450 litres, depending on the ground conditions. One pot (approx. 230g) of drain dye will treat 28,800 litres at 140ml per 450 litres and up to 16,200 litres at 250ml per 450 litres. Weight 0.3 kg.

Price: £7.30 (£8.58 Including VAT at 17.5%)

For tracing the direction of flow or to where a drain pipe runs. The recommended dilution rate is one pot of dye (approx. 230g) to 9 litres of water. The liquid is then use at a rate of 140ml-250ml per 450 litres, depending on the ground conditions. One pot (approx. 230g) of drain dye will treat 28,800 litres at 140ml per 450 litres and up to 16,200 litres at 250ml per 450 litres. Weight 0.3 kg.

Price: £7.30 (£8.58 Including VAT at 17.5%)

For tracing the direction of flow or to where a drain pipe runs. The recommended dilution rate is one pot of dye (approx. 230g) to 9 litres of water. The liquid is then use at a rate of 140ml-250ml per 450 litres, depending on the ground conditions. One pot (approx. 230g) of drain dye will treat 28,800 litres at 140ml per 450 litres and up to 16,200 litres at 250ml per 450 litres. Weight 0.3 kg.